Glass reinforced plastic blower
Product Description
I. equipment introduction.
Glass fiber reinforced plastic fan refers to glass fiber reinforced plastic (FRP) material fan, its appearance, size and carbon steel material fan are exactly the same, just the shell and the impeller for glass fiber reinforced plastic material, its biggest characteristic is corrosion resistant, resistant to acid and alkali, belongs to a kind of anti-corrosion fan.
Features and advantages
1. The manufacturing process of the shell is as follows: the shell can also be made of cold-rolled steel plate, and the surface is treated with anti-corrosion.
Process is as follows: 2. The impeller is applicable to office buildings, shopping malls, theaters, hospitals, factories and enterprises workshop, the place such as the basement ventilation exhaust, delivery should be by excluding viscous material gas, and gas temperature is not more than 80 ℃, medium contained content quality is not greater than 150 mg/M3.
The Product Show
The machine shell is made of fiberglass cloth and unsaturated resin. The unsaturated resin contains anti-ultraviolet agent, which is resistant to aging, high strength, light weight and corrosion resistance. It makes up for the shortcomings of aging, cracking, deformation and short life of plastic fans in metallurgy, chemical and other corrosive plants, which greatly improves its use value.
Features and advantages
1. The manufacturing process of the shell is as follows: the shell can also be made of cold-rolled steel plate, and the surface is treated with anti-corrosion.
Process is as follows: 2. The impeller is applicable to office buildings, shopping malls, theaters, hospitals, factories and enterprises workshop, the place such as the basement ventilation exhaust, delivery should be by excluding viscous material gas, and gas temperature is not more than 80 ℃, medium contained content quality is not greater than 150 mg/M3.
Fan impeller with moulded glass fiber reinforced plastic impeller, the bending strength is not less than 196 mpa, each section using excessive, smooth appearance is bright and clean, no cracks, gaps, defects such as burrs, the overall effect is good, the fan do static balance test, according to "rigid rotor balancing precision," grade G6.3 level, tip from ram wall take 30 mm clearance, the error is not more than plus or minus 10 mm, fan pneumatic reasonable, big air volume, low noise, high efficiency and corrosion resistance.
Features and advantages
1. The manufacturing process of the shell is as follows: the shell can also be made of cold-rolled steel plate, and the surface is treated with anti-corrosion.
Process is as follows: 2. The impeller is applicable to office buildings, shopping malls, theaters, hospitals, factories and enterprises workshop, the place such as the basement ventilation exhaust, delivery should be by excluding viscous material gas, and gas temperature is not more than 80 ℃, medium contained content quality is not greater than 150 mg/M3.
The company adopts a forming mold, on the one hand, improve the appearance of beautiful and smoothness, better to enhance the overall strength of the fan, changed the traditional craft of shape clumsy, the poor strength, so that the products are better for the customer the production and use the strong backing.
Features and advantages
1. The manufacturing process of the shell is as follows: the shell can also be made of cold-rolled steel plate, and the surface is treated with anti-corrosion.
Process is as follows: 2. The impeller is applicable to office buildings, shopping malls, theaters, hospitals, factories and enterprises workshop, the place such as the basement ventilation exhaust, delivery should be by excluding viscous material gas, and gas temperature is not more than 80 ℃, medium contained content quality is not greater than 150 mg/M3.
Product Categories : Waste Gas Treatment Equipment > Purification Tower